What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Rid-X Septic System Treatment, Septi-Pacs-11/06/2014
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaRid-X Septic System Treatment, Septi-Pacs helps maintain septic systems with advanced enzymes that start working immediately to break down household waste and natural bacteria that work continuously to help reduce tank buildup. RID-X replenishes the delicate balance of beneficial bacteria and enzymes that help reduce the rate of sludge accumulation in the tank. RID-X contains billions of 100 percent natural active bacteria and enzymes that have been scientifically proven to digest septic waste. Cellulase breaks down toilet paper, vegetable matter, and some foods; lipase breaks down fats, oils, and grease; protease breaks down proteins; and amylase breaks down starches. Combined, these active ingredients help prevent buildup in the septic system.
Purpose of product.
Usage: Septic system treatmentStructure such as solid, liquid, aerosol etc.
Form: pacsDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 14, 2024Morris Corporate Center IV 399 Interpace Parkway
Parsippany NJ 07054
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Purpose served by this chemical
FunctionChemical of Concern (CoC)
Chemical of Concern(CoC)Stabilizer 999999-92-5 -- Stabilizer No Bacteria, complex with amylase and proteinase 068920-42-3 -- Enzyme soil remover No Kaolin clay 001332-58-7 1.0-5.0 Filler No Wood flour 009004-34-6 1.0-5.0 Polymer Yes 
CoC List
Titanium dioxide 013463-67-7 0.1-1.0 Pigment Yes CoC List
Subtilisin (proteolytic enzyme) 009014-01-1 0.1-1.0 Enzyme soil remover Yes CoC List
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :November 06, 2014 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING1 1 0 -
Warnings
Hazard Statements
No known significant effects or critical hazards.
Precautionary statements.
General
Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Prevention
Wash hands thoroughly after handling.
Response
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention/ advice.
IF ON SKIN: Rinse skin with water. If skin irritation occurs: Get medical attention/advice
Storage
Not applicable.
Disposal
Not applicable. -
Acute health effects
From SDS:
Hazards Identification
Emergency Overview
None.
Potential Health Effects
Routes of exposure: Not available.
Eye Contact: May cause eye irritation upon direct contact with eyes.
Skin Contact: May cause skin irritation.
Inhalation: No known significant effects or critical hazards.
Ingestion: No known significant effects or critical hazards. -
Chronic health effects
From SDS:
No data. -
Carcinogenicity
Titanium dioxide: IARC Group 2B -
Handling information
Put on appropriate personal protective equipment. Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.
-
Disposal information
The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
-
First Aid
Eye Contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.
Skin Contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur.
Ingestion: Wash out mouth with water. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.
-
UN Global Harmonization Classification
